Products

Polyseamseal® Speed Seal™ Kitchen & Bath Silicone

Make fast work of sealing your kitchen & bath the Speed Seal™ This Enhanced Silicone Technology (EST™) formula has a fast-dry system that withstands water contact 2 hours after application. The 100% silicone rubber creates a watertight, mildew-resistant seal.

Showers, Sinks, Tubs, Tile, Fixtures and Countertops

Clean tools and sealant residue immediately with mineral spirits. Cured sealant may be carefully cut away with a sharp-edged tool.

Fast-Dry Silicone System withstands shower and water contact in two hours so you can "Shower in 2 Hours"
Cured Sealant is Mold & Mildew Resistant

Surface must be free of caulk, clean and dry. Paint surface before caulking. CANNOT paint over silicone.
Mask both sides of joint.
Cut tip at a 45° angle to desired bead size; 1/8“ minimum.
With caulk gun, apply steady trigger pressure forcing caulk into surface.
Immediately after use, smooth bead with a tool if needed, remove masking tape and wipe excess off hands and tools before washing.
Tack free in 30 minutes. Allow 2 hours before using sealed area. Do not touch or clean sealant for 24 hours.