Products

Baseboards, molding, drywall, plaster, ceramic and wood windows and doorframes

Clean tools and excess caulk with soap & water before caulk dries.

• 100% acrylic base that provides a weather-resistant, flexible seal against air, moisture, dirt and dust

• Accepts minimal joint movement

• Can be painted with oil and acrylic paints

• Soap and water clean up

• Contains no silicone

• Ideal for baseboards, molding, drywall, plaster, ceramic and wood windows and doorframes

• Also adheres to brick, concrete and metal

• Remove old Caulk. Silicone residue left on the surface will decrease adhesion.

• Clean thoroughly to remove dirt, oil, wax, and loose paint.

• CUT tip on a slant to desired bead size.

• With caulk gun, apply steady trigger pressure forcing sealant onto the surface for a smooth bead.

• Smooth bead with wet finger or putty knife.

• Wipe off excess with damp cloth before caulk dries.

• Paintable after 1 hour, depending on temperature and humidity.

• Allow 24 hours before exposing to water.