Products
Polyseamseal® Ever Bright™ Active Silicone Sealant
Defend against mold growth on kitchen and bath sealant for five years.
Polyseamseal® EVER BRIGHT™ active silicone sealant with Triple Action Protection prevents mold adhesion, resists the spread of mold and actively inhibits mold growth on sealant for five years. The worry-free formulation insures a clean, watertight seal that saves you from costly renovations and time-consuming repairs. So why worry about unsightly mildew and mold? Use Polyseamseal® EVER BRIGHT™ sealant and don't.
Showers, Sinks, Tubs, Tile, Fixtures and Countertops
Clean tools and sealant residue immediately with mineral spirits. Cured sealant may be carefully cut away with a sharp-edged tool.
Triple action protection
Inhibits mold growth on cured for 5 years
Neutrally curing silicone sealant
Water Resistant
Great adhesion properties
No cracking, peeling or shrinking
Surface must be free of caulk, clean and dry. Paint surface before caulking. CANNOT paint over silicone.
Mask both sides of joint.
Cut cartridge spout above the threads. Screw nozzle on and cut at a 45° angle to desired bead size; 1/8" minimum.
With a caulk gun, apply steady trigger pressure forcing caulk onto surface.
Immediately after use, smooth bead with a tool if needed, remove masking tape and wipe excess off hands and tools before washing.
Allow 24 hours before exposing to water.
To keep sealant mold-free for 5 years, clean and dry sealant and surrounding areas regularly.
Ever Bright™ Active Silicone Sealant
Product Information
and Downloads
Available Colors
White |
 |
|
Please Note: | ||
MSDS Sheets
Ever Bright™ Active Silicone Sealant
Tech Data Sheets
Ever Bright™ Active Silicone Sealant
Where to Buy
Use this quick finder to locate a store close to you that carries Ever Bright™ Active Silicone Sealant.
Multimedia